Power Splitters and Combiners: 2 to 30 MHz, Type "HF"
These RF power splitters and combiners are intended for combining the powers of multiple amplifiers having 50 ohm inputs and outputs. Power balancing resistors, which are necessary to maintain operation at reduced power if one or more amplifiers fail, are not included but provisions are made to include them. Without these resistore, the power output will be zero in the event of a failure.
Click picture (below) for larger view
2-port splitter-combiner (above) with power handling capability up to 600 W
Click either picture (below) for larger view
2-port power splitter-combiner (above with schematic) with power handling capability up to 1000 W
Click either picture (below) for larger view
4-port power splitter-combiner (above with schematic) with power handling capability up to 1200 W
Click picture (below) for larger view
4-port splitter-combiner (above) with power handling capability up to 2000 W
Key Benefits:
 | 50 ohm interface on all ports |
| 30 dB minimum isolation between splitter output and combiner input ports. |
| VSWR guaranteed less than 2:1 for 2 to 30 MHz |
Available from stock, depending on quantity (3-port systems available on special order). Contact us about your special requirements and our low prices.
|
|
|
8280 W. Avenida Del Sol Peoria, AZ 85383 Phone: 623-376-7720 FAX: 623-376-7721 |
