RF Transformers: 2 to 300 MHz, Type "U"
Click picture (below) for larger view
![[Product Image]](images/typeuLarge.gif)
Basic Transformer pictured (above) in 4:1 (L) and 9:1 (R) impedance ratios. Their self-inductance limits the low frequency end to approximately 74 MHz.
Click picture (below) for larger view
Typical application (above) of U-type Transformers in a 5 to 175 MHz, 300 W amplifier.
The Type "U" Transformers are intended for input, output and interstage impedance matching apllications in push-pull amplifiers in the 2 to 300 MHz frequency range. Depending on the power levels involved, the band may have to be divided into two or three segments. The Type "U" transformer requires a presence of magnetic material, such as ferrite, to increase the winding inductance for operation below approximately 75 MHz.
Key Features:
 | Power handling capability exceeding 1 kW. |
| Primary and secondary D.C. isolated. |
| Impedance ratios from 1:1 to 16:1 available. |
| Small physical size. |
The type "U" transformer is not a stock item due to a large variety of requirements in mechanical aspects, power level, impedance ratio and bandwidth. Contact us about your specific requirements and our low prices.
|
|
|
8280 W. Avenida Del Sol Peoria, AZ 85383 Phone: 623-376-7720 FAX: 623-376-7721 |
